Less welding fume in the workshop air

Air cleaners with filters and bipolar ionisation capture the fine particles that the ventilation cannot keep up with. That protects both the staff and the machines.

lower particle level in a workshop
78 %
cleaned by one OxySan 4000
8,000 m³

The particle level is measured on site, one week without and one week with air cleaners. How we measure

We already have extraction

The extractor takes what forms at the table. The air cleaner takes what spreads in the room.

Book a walk-through

What are the requirements?

Risk assessment, measures at the source and exposure limits. Ask us for a summary.

Ask us

How many units are needed?

Work out the volume of the premises. We look at them and measure before we propose.

Book a walk-through
Sparks from grinding in a workshop

The fume does not stop at the extractor

The local extractor takes what forms at the welding table. The rest hangs in the air, follows the air currents and settles on machines, electronics and windows. The ventilation is sized for a steady flow, not for the peaks when three welders run at once.

OxySan captures the fine particles in a filter and at the same time spreads ions in the room that make the rest cluster together and fall to the floor, where they can be swept up.

Where our air cleaners work

Volvo CarsGöteborgs SpårvägarICACramoSkanskaTjörnbagarnBostads AB Poseidon
78 %

That is how much the particle level fell in a mechanical workshop after OxySan was installed. Less wear on the equipment and less load on the ventilation came with it.

A mechanic working on a tram in a repair hall

Around the clock at Göteborgs Spårvägar

OxySan units run around the clock in the tram repair halls to keep dust and particles on the floor. Dust and fume from grinding, cutting and welding used to be a major nuisance.

More customer references

”The tests showed very positive results, with a considerably better working environment and far fewer particles in the air.”

Volvo Cars (translated from Swedish)

What a walk-through looks like

We come to the workshop and look at the work steps, the air currents and where the fume collects. Then we propose the number of units and where to place them.

If you want to see the effect before you decide, we measure the particle level for one week without and one week with air cleaners.

Book a walk-through
OxySan 4000

OxySan

Filters and ionisation for workshops, construction and remediation

OxySan 200
up to 400 m³, 50 W
OxySan 1000
up to 2,000 m³, 220 W
OxySan 4000
up to 8,000 m³, 300 W
Filtration
ePM1 80 % (1000 and 4000)
Go to OxySan

Talk to someone who has been in your kind of premises

Peter books the walk-through and comes himself. Outside Sweden we work with distributors.

Peter SvenskPeter SvenskSales, Sweden and international+46 70 562 72 72peter.svensk@rlt.se

Book a walk-through of the premises

Tell us what is done in the workshop and roughly how big it is. We arrange walk-throughs in Sweden and work with distributors elsewhere.